ECI 6D

Fully balanced integrated amplifier with built-in D/A converter

The ECI 6D is a powerful integrated amplifier, equipped with a number of analogue and digital inputs offering  a wide range of connectivity.

With its high performance sample rate converter and D/A converter the ECI 6D is able to improve all of your digital sources like TV’s, cable- and satellite tuners, CD/DVD/Blu-Ray players and not to forget your computer and media player. Independent of their native resolution all digital sources will be upsampled to 24bit/ 192kHz and can be connected by SPDIF, USB or Toslink. 

The new ECI 6D offers 2 x 125 Watts and is based on the successful ECI 5 MK II. To make it even better we have equipped with an even better power supply and a more sophisticated preamplifier module. As a result we can offer you an extremely substantial and dynamic amplifier, capable to control a wide range of speakers in the marked.  

Analogue sources can be connected to one balanced (XLR) input and three single-ended (RCA) inputs. Two preamplifier outputs, one balanced and one single ended, making sure the amplifier is prepared for future extensions.

   

All measurements are made at 120V / 240V  //50Hz / 60Hz

 Digital section:

D/A converter24 bit/192 kHz

Sample rate converter24bit / 192kHz

InputsSPDIF, 2x Toslink, 1x USB

USB:                                    asynchronous  up to 24bit/ 192kHz supported

SPDIF:                                24bit/ 192kHz

Toslink:                              24bit/ 96kHz

 

Preamplifier section

Input impedance ( Balanced input )47Kohm

Maximum input level10 Volt RMS

Noise floor ( 1Vrms, 20 - 20 kHz, balanced)

-135 dB

THD + N   (1Vrms, 20 - 20 kHz, balanced)    <0.004%

Gain (Balanced)0 dB

 

Amplifier section

Output Impedance< 0,02 Ohm

Frequency response1 – 150 kHz

Channel separation> 120 dB

THD ( 20 - 20 kHz)< 0.004%

Maximum peak current>100A

Damping factor  8 ohm load>350

I Input sensitivity  120W output1.3Vrms

Input sensitivity HT  120W output1Vrms

Gain HT Inputx36 (31 dB)

Rated output power

8 ohms2 x 125 W

4 ohms2 x 200 W

2 ohms2 x 370 W

Power consumption               

110 W

Standby1W

(no load or signal)

 

Dimensions

Width465 mm / 18.3 inches

Depth405 mm / 16 inches

Height128 mm / 5 inches

Weight20Kg / 44 lbs.